Fat channel intolerant что это
Для отключения данного рекламного блока вам необходимо зарегистрироваться или войти с учетной записью социальной сети.
Сообщения: 12
Благодарности: 1
zai, сделал, как сказано.
Вообще на принтере и так стоит статика. На роутере была простая перестраховка.
IPv6 прибил.
Систему перезагрузил.
Не помогло.
Не там копаем: если бы дело было в протоколах и настройках принтера — не работало бы соединение по шнуру. Уже думал об этом и пробовал.
Возможно, что-то не так в настройках WiFi адаптера?
Привожу, может кто-то что-то заметит.
Адаптер Intel Centrino Wireless-N 2230
Дальше в формате «Наименование настройки» — «Значение.
802.11n Channel Width for band 2.4 - Auto 802.11n Mode - Enabled Ad Hoc Channel 802.11b/g - 1 Ad Hoc QoS Mode - WMM Enabled ARP offload for WoWLAN - Enabled Bluetooth(R) AMP - Enabled Fat Channel Intolerant - Enabled GTK rekeying for WoWLAN - Enabled Mixed Mode Protection - RTS/CTS Enabled NS offload for WoWLAN - Enabled Roaming Aggressiveness - Medium-low Sleep on WoWLAN Disconnect - Enabled Transmit Power - Highest Wake on Magic Packet - Enabled Wake on Pattern Match - Enabled Wireless Mode - 802.11g
Всё, проблема решена.
Помогла вот эта статья: http://www.intel.com/support/wireless/sb/CS-030709.htm
——-
Ubi est mors victoria tua? Ubi est mors stimulus tuus?
Последний раз редактировалось Angry Demon, 16-06-2014 в 19:07 .
Fat channel intolerant что это
Надежный системный администратор для малого бизнеса
ежедневно, с 9:30 до 20:00 8 (499) 653-83-80
Ветрикс Надежный системный администратор для малого бизнеса
Настройка 802.11n на WLC — Часть 5
Если сеть не состоится только 802.11n клиенты, используйте Смешанную защиту режима так 802.11n, клиенты сосуществуют с существующим 802.11a или 802.11 b/g клиента. Если в ближайшее время вы планируете провести модернизацию компьютерного парка, то качественный ИТ-аудит вам поможет.
Установите Ширину канала или в Автоматическом режиме, таким образом, клиент выполняет согласование о ширине канала с WLC, или в 20 МГц, если это — 2.4 полосы Частоты ГГц. Если обслуживание компьютеров выполняет квалифицированными инженерами, то они легко справятся с этими задачами.
Примечание. Cisco поддерживает 40 МГц только в полосе на 5 ГГц. Заставьте опцию ширины канала в Автоматический использовать ширину канала на 40 МГц. Однако удостоверьтесь, что ширина канала на 40 МГц включена на WLC.
Отключите свойство Fat Channel Intolerant для разрешения Связывания Канала на 40 МГц.
Forum
Does anyone know the technical details behind Intel’s 5100 AGN client device setting called «Fat Channel Intolerant» ? Their website is poor on technical details. In brief, it says «it communicates to surrounding networks that the Wi-Fi adapter is not tolerant of 40 Mhz channels in the 2.4 GHz band». Elsewhere it mentions being incompatible with 802.11n — duh. Is this merely the way of telling the adapter to only make 20 MHz connections, or is it some broadcast that tells nearby neighbors not to use it also ? My guess is the former — but the opposite would be good to know about.
My understanding is setting that flag does both — tells the card not to use 40 MHz channels and also begs the neighbours not to use 40 MHz channels as well. I say beg because I did some poking around on some Aruba gear at my place and it looks like ArubaOS is set to ‘Honor 40 MHz Intolerance’ by default but it is just a check box [url=http://www.flickr.com/photos/simplywifi/5798295274](see screenshot here)[/url] so anyone could simply decide not to honor that setting at any time. I can only assume other enterprise vendors have a similar toggle. Not sure about home gear though. Seems like a good option for 2.4 GHz in theory, but if people can just turn it off I’m wondering how effective it really is. In case anyone is interested, here is a screenshot showing the 40 MHz intolerance bit in Wireshark — [url=http://www.flickr.com/photos/simplywifi/5797819731](Intolerance bit not set)[/url]
Cool thread. WLANMAN, why wouldn’t an agn card be n capable? I just did a quick search on 5100AGN . looks like an old intel card that was designed during pre-n era. is that the one you’re referring to? Looks like 5300 is the newer card, post n ratification. I agree with you both that it does seem like a smart option, to be able to request no 40 MHZ channels for 2.4. (Of course, why not just run 5GHZ and be done with it.) But «not allowing» doubled channels on the device itself at 2.4 almost seems useless to me; who would want to do that anyhow, and is INTEL just proecting people from themselves? =) But the idea of it being able to tell neighbors seems it might be useful. of course if I were running a 40 MHZ network and some yahoo card was able to bump me down to 20 I might be irritated. I am curious about exactly how this feature works now, what it specifically does. Thanks for the screen capture btw SimplyWiFi. Interesting that the bit’s set by default. I wonder if any of the SOHO devices address this option. Something more *sigh* to research! =) Good stuff! Here’s the intel whitepaper I saw for INTEL’s cards: http://www.intel.com/products/wireless/adapters/5000/index.htm?wapkw=(5100)
SeaLass, Setting the «Fat Channel Intolerant» and at the same time allowing your own device to allow 40MHZ is what would be incompatible. Which Intel seems to agree with. It would definitely not be «playing nice» to run 40MHz yourself, and not let your neighbors to do the same. If you are running 40 MHZ channels in a sea of 2.4 GHZ 20 MHz channels you’re definitely being a bandwidth «road hog» — that is, if you are not following the rules. I live in an area where several people are running «pre-n» AP’s. In this case Belkin. They defineitely don’t «play nice», and stomp all over everyone elses 20MHz wide comms. They don’t seem to care what is going on around them.
Aha! THAT makes sense, got it. Thanks!!
At the current time the WFA says «Wi-Fi CERTIFIED n products are configured to operate using 20 MHz channels by default, [u]and must employ coexistence mechanisms[/u] to help ensure that the device defaults to 20 MHz operation when sharing the frequency with other Wi-Fi networks.» It seems many people (of the type who automatically set output power to MAX) also like to set 40MHz channels when they don’t really need it. Like you said — if you want 40 MHz, please go to 5 GHz.
. well, but still. if one’s running in 2.4 GHz, it just seems like it would be shooting oneself in the foot to run 40 MHZ channel width, unless using Meru controller or similar, because of limitations on AP channel separation. I think you’d be down to only one channel option then, or possibly two. . but I guess it really comes down to whether we’re talking Enterprise or SOHO. in the problem you are describing it would be SOHO. Right? I guess if you only have one AP you don’t much care about managing your spectrum. . and if enterprise, it comes back to the thought that I wouldn’t want to be running in 2.4 anyhow so I guess the point would be moot. Yes?
Fat channel intolerant что это
Часовой пояс: UTC + 3 часа
Проблема с dir-300 и WiFi
Заголовок сообщения: Проблема с dir-300 и WiFi
Добавлено: Пт июл 23, 2010 20:20
Сразу предупреждаю я в этом нечего не понимаю, полный нуль.
Ситуация такая: вчера приобрёл у своего провайдера роутер d-link dir-300 Ver. 2.0.2 B1. Пришёл человек, всё поставил и ушёл. Интернет есть, торент качает со скоростью 3Mb, но появилась проблема.
Играю в онлайн игру (типа Lineage, немного переделанная) и после установки этого роутера начали появляется лаги. Делал трассировку, скачивал спец. программу с сайта игры, где показывается потеря пакетов, пинг и т.д. Вобщем всё показывает на то что лагов не должно быть. Пинг в пределах нормы, пакеты все доходят.
Решил попробовать сунуть синий шнур в роутер (тобишь что бы было через провод, а не через WiFi) и о чудо, лаги пропали!
Получается проблема в Wifi.
Что предпринял: обновил драйвера wireless
Обновил: wireless console (было 2-а, стала 3)
Но не чего не помогло!! Помогите решить проблему!
P.S Ещё заметил очень странную вещь. При включенном торонте, когда идёт закачка чего либо, всякие медиаплееры, youtube и т.д грузятся очень быстро, а, при выключенном, загрузка в разы меньше.
Пример: хочу по ютубу посмотреть 10 минутный ролик. При выключенном торенте этот ролик полностью загрузится ~1 мин, но стоит мне включить торент и поставить что то на закачку, как этот же ролик загрузится за ~10-20 сек.
Заранее спасибо
С уважением Нюб =)