Please select a valid python interpreter pycharm что делать

Configure a Python interpreter

To work with your Python code in PyCharm, you need to configure at least one Python interpreter. You can use a system interpreter that is available with your Python installation. You can also create a Virtualenv, pipenv, Poetry, or conda virtual environment . A virtual environment consists of a base interpreter and the installed packages.

With PyCharm Professional , you can also configure interpreters to execute your Python code on remote environments by using SSH, Vagrant, Docker, Docker Compose, or WSL (only for Windows).

When you configure a Python interpreter , you need to specify the path to the Python executable in your system. So, before configuring a Python interpreter, you need to ensure that you’ve downloaded Python and installed it in your system and you’re aware of a path to it.

You can create several Python interpreters based on the same Python executable. This is helpful when you need to create different virtual environments for developing different types of applications. For example, you can create one virtual environment based on Python 3.6 to develop Django applications and another virtual environment based on the same Python 3.6 to work with scientific libraries.

Python interpreters can be configured for a new project or for the current project (you can create a new interpreter or use one of the existing interpreters).

Configuring an existing Python interpreter

At any time, you can switch the Python interpreter either by using the Python Interpreter selector or in Settings .

Switch the Python interpreter using the Python Interpreter selector

• The Python Interpreter selector is located on the status bar. It is the most convenient and quickest way to switch the Python interpreter. Just click it and select the target interpreter:

Switch the Python interpreter in the IDE settings

1. Press Control+Alt+S to open the IDE settings and then select Project | Python Interpreter .
2. Click the drop-down and select the desired Python interpreter:
3. If it’s not on the list, click Show All . Then select the desired interpreter in the left pane and click OK . When PyCharm stops supporting any of the outdated Python versions, the corresponding Python interpreter is marked as unsupported.

When you change the project interpreter and select an SSH interpreter, you might need to synchronize the local content with the target server. Mind a notification balloon in the lower-right corner:

You can choose to enable the automatic uploading of files to the server:

• Click Auto-upload files to start uploading on the next save.
• Click Sync and auto-upload files to immediately sync the files and upload them on every save in future.

Modify a Python interpreter

1. Press Control+Alt+S to open the IDE settings and then select Project | Python Interpreter .
2. Expand the list of the available interpreters and click Show All .
3. You can modify the path to the Python executable in the Interpreter path field. When the Associate this virtual environment with the current project checkbox is enabled, the interpeter is available only in the current PyCharm project. To change the interpreter name, select the target interpreter and click . The Python interpreter name specified in the Name field, becomes visible in the list of available interpreters. Click OK to apply the changes.

Remove a Python interpreter

If you no longer need a Python interpreter for a project, you can remove it from the project settings.

1. Do one of the following:
   • Press Control+Alt+S to open the IDE settings and then select Project | Python Interpreter .
   • Click the Python Interpreter selector and choose Interpreter Settings .
2. Expand the list of the available interpreters and click Show All .
3. Choose the interpreter that you want to remove and click .

Creating a new Python interpreter

Configuring local Python interpreters

To configure a local Python interpreter for the current project, follow one of the procedures below:

Configure a system interpreter

1. Ensure that you have downloaded and installed Python on your computer. Installing Python on Windows from Microsoft Store If you are on Windows, you can download Python from the Microsoft Store and install it as a Python interpreter. Once the Python application is downloaded from the Microsoft Store, it becomes available in the list of the Python executables. Note that interpreters added from the Microsoft Store installations come with some limitations. Because of restrictions on Microsoft Store apps, Python scripts may not have full write access to shared locations such as TEMP and the registry.
2. Do one of the following:
   • Click the Python Interpreter selector and choose Add New Interpreter .
   • Press Control+Alt+S to open Settings and go to Project: | Python Interpreter . Click the Add Interpreter link next to the list of the available interpreters.
   • Click the Python Interpreter selector and choose Interpreter Settings . Click the Add Interpreter link next to the list of the available interpreters.
3. Select Add Local Interpreter .
4. In the left-hand pane of the Add Python Interpreter dialog, select System Interpreter .
5. In the Interpreter drop-down, select one of the Python interpreters that have been installed in your system, or click and in the Select Python Interpreter dialog that opens, choose the desired Python executable. You will need admin privileges to install, remove, and upgrade packages for the system interpreter. When attempting to install an interpreter package through an intention action, you might receive the following error message: As prompted, consider using a virtual environment for your project.
6. Click OK to complete the task.

Create a virtualenv environment

1. Do one of the following:
   • Click the Python Interpreter selector and choose Add New Interpreter .
   • Press Control+Alt+S to open Settings and go to Project: | Python Interpreter . Click the Add Interpreter link next to the list of the available interpreters.
   • Click the Python Interpreter selector and choose Interpreter Settings . Click the Add Interpreter link next to the list of the available interpreters.
2. Select Add Local Interpreter .
3. In the left-hand pane of the Add Python Interpreter dialog, select Virtualenv Environment .
4. The following actions depend on whether you want to create a new virtual environment or to use an existing one. New virtual environment
   • Specify the location of the new virtual environment in the Location field, or click and browse for the desired location in your file system. The directory for the new virtual environment should be empty.
   • Choose the base interpreter from the list, or click and find the desired Python executable in your file system.
   • Select the Inherit global site-packages checkbox if you want all packages installed in the global Python on your machine to be added to the virtual environment you’re going to create. This checkbox corresponds to the —system-site-packages option of the virtualenv tool.

   Existing virtual environment

   • Choose the desired interpreter from the list.
   • If the desired interpreter is not on the list, click , and then browse for the desired Python executable (for example, venv/bin/python on macOS or venv\Scripts\python.exe on Windows).

The selected virtual environment will be reused for the current project.

If PyCharm displays the Invalid environment warning, it means that the specified Python binary cannot be found in the file system, or the Python version is not supported. Check the Python path and install a new version, if needed.

Create a conda environment

1. Ensure that Anaconda or Miniconda is downloaded and installed on your computer, and you’re aware of a path to its executable file. For more information, refer to the installation instructions.
2. Do one of the following:
   • Click the Python Interpreter selector and choose Add New Interpreter .
   • Press Control+Alt+S to open Settings and go to Project: | Python Interpreter . Click the Add Interpreter link next to the list of the available interpreters.
   • Click the Python Interpreter selector and choose Interpreter Settings . Click the Add Interpreter link next to the list of the available interpreters.
3. Select Add Local Interpreter .
4. In the left-hand pane of the Add Python Interpreter dialog, select Conda Environment .
5. The following actions depend on whether you want to create a new conda environment or to use an existing one. New conda environment
   • Select the Python version from the list.
   • Normally, PyCharm will detect conda installation. Otherwise, specify the location of the conda executable, or click to browse for it.
   • Specify the environment name.

   Existing conda environment

   • Choose the desired environment from the list.

The selected conda environment will be reused for the current project.

Create a pipenv environment

1. Do one of the following:
   • Click the Python Interpreter selector and choose Add New Interpreter .
   • Press Control+Alt+S to open Settings and go to Project: | Python Interpreter . Click the Add Interpreter link next to the list of the available interpreters.
   • Click the Python Interpreter selector and choose Interpreter Settings . Click the Add Interpreter link next to the list of the available interpreters.
2. Select Add Local Interpreter .
3. In the left-hand pane of the Add Python Interpreter dialog, select Pipenv Environment .
4. Choose the base interpreter from the list, or click and find the desired Python executable in your file system.
5. If your project contains Pipfile , you can choose whether you want to install the packages listed in it by enabling or disabling the Install packages from Pipfile checkbox. By default, the checkbox is enabled.
6. If you have added the base binary directory to your PATH environmental variable, you don’t need to set any additional options: the path to the pipenv executable will be autodetected. If the pipenv executable is not found, follow the pipenv installation procedure to discover the executable path, and then paste it in the Pipenv executable field.
7. Click OK to complete the task.

When you have set the pipenv virtual environment as a Python interpreter, all available packages are added from the source defined in Pipfile . The packages are installed, removed, and updated in the list of the packages through pipenv rather than through pip.

Create a Poetry environment

1. Do one of the following:
   • Click the Python Interpreter selector and choose Add New Interpreter .
   • Press Control+Alt+S to open Settings and go to Project: | Python Interpreter . Click the Add Interpreter link next to the list of the available interpreters.
   • Click the Python Interpreter selector and choose Interpreter Settings . Click the Add Interpreter link next to the list of the available interpreters.
2. Select Add Local Interpreter .
3. In the left-hand pane of the Add Python Interpreter dialog, select Poetry Environment .
4. The following actions depend on whether you want to create a new Poetry environment or to use an existing one. New Poetry environment
   • Select Poetry Environment .
   • Choose the base interpreter from the list, or click and find the desired Python executable in your file system.
   • If your project contains pyproject.toml , you can choose whether you want to install the packages listed in it by enabling or disabling the Install packages from pyproject.toml checkbox. By default, the checkbox is enabled.
   • If PyCharm doesn’t detect the poetry executable, specify the following path in the Poetry executable field, replacing jetbrains with your username:

/Users/jetbrains/Library/Application Support/pypoetry/venv/bin/poetry
C:\Users\jetbrains\AppData\Roaming\pypoetry\venv\Scripts\poetry.exe
/home/jetbrains/.local/bin/poetry

• Make sure that the project directory contains a pyproject.toml file.
• Select Existing environment . Then expand the Interpreter list and choose the desired interpreter.
• If the desired interpreter is not on the list, click, and then browse for the Python executable within the previously configured Poetry environment.

The selected Poetry environment will be reused for the current project.

Configuring remote Python interpreters

When a remote Python interpreter is added, at first the PyCharm helpers are copied to the remote host. PyCharm helpers are needed to run remotely the packaging tasks, debugger, tests and other PyCharm features.

Next, the skeletons for binary libraries are generated and copied locally. Also, all the Python library sources are collected from the Python paths on a remote host and copied locally along with the generated skeletons. Storing skeletons and all Python library sources locally is required for resolve and completion to work correctly.

PyCharm checks the remote helpers version on every remote run, so if you update your PyCharm version, the new helpers will be uploaded automatically, and you don’t need to recreate remote interpreter.

Configure a WSL interpreter

1. Do one of the following:
   • Click the Python Interpreter selector and choose Add New Interpreter .
   • Press Control+Alt+S to open Settings and go to Project: | Python Interpreter . Click the Add Interpreter link next to the list of the available interpreters.
   • Click the Python Interpreter selector and choose Interpreter Settings . Click the Add Interpreter link next to the list of the available interpreters.
2. Select On WSL .
3. Wait until PyCharm detects Linux on your machine and completes introspection. Press Next to proceed:
4. In the left-hand pane of the dialog, select the type of the WSL interpreter you want to create: Virtual Environment , Conda Environment , or System Interpreter . For a system interpreter, just provide the path to the Python executable in the selected Linux distribution. For virtual and conda environments, you can provide a path to a Python executable of an existing environment in the selected Linux distribution or create a new environment based on the specified Python.

Once done, the new interpreter will be added to your project, and the default mnt mappings will be set.

Configure an interpreter using Vagrant

1. Ensure that the following prerequisites are met (outside of PyCharm):
   • One of supported Vagrant providers is installed on your computer.
   • Vagrant is installed on your computer, and all the necessary infrastructure is created.
   • The parent folders of the following executable files have been added to the system PATH variable:
     • vagrant.bat or vagrant from your Vagrant installation. This should be done automatically by the installer.
     • VBoxManage.exe or VBoxManage from your Oracle’s VirtualBox installation.
   • The required virtual boxes are created.
2. Make sure that the Vagrant plugin is enabled.
3. Ensure that you have properly initiated and started Vagrant. Basically, you need to open the Terminal window and execute the following commands:

$ vagrant init ubuntu/trusty64
$ vagrant up

For more information, refer to Vagrant documentation.

Do one of the following:

• Click the Python Interpreter selector and choose Add New Interpreter .
• Press Control+Alt+S to open Settings and go to Project: | Python Interpreter . Click the Add Interpreter link next to the list of the available interpreters.
• Click the Python Interpreter selector and choose Interpreter Settings . Click the Add Interpreter link next to the list of the available interpreters.

Select On Vagrant .

Specify the path to the Vagrant instance folder in Vagrant Instance Folder . Wait until you see a link in Vagrant Host URL .

In the New Target: Vagrant dialog, click the browse icon next to the Vagrant Instance Folder field, and specify the desired Vagrant instance folder. This results in showing the link to Vagrant Host URL .

In the next field, PyCharm will display the path to the Python executable. Press «Next» to proceed.

You can create a virtual environment (venv or conda) or use a system Python interpreter for the target Vagrant instance. Note that virtual environment must be configured and available in the specified Vagrant instance folder. Otherwise, the corresponding lists will be empty. Clik Create to complete the task.

Configure an interpreter using SSH

1. Ensure that there is an SSH server running on a remote host, since PyCharm runs remote interpreters via ssh-sessions.
2. Do one of the following:
   • Click the Python Interpreter selector and choose Add New Interpreter .
   • Press Control+Alt+S to open Settings and go to Project: | Python Interpreter . Click the Add Interpreter link next to the list of the available interpreters.
   • Click the Python Interpreter selector and choose Interpreter Settings . Click the Add Interpreter link next to the list of the available interpreters.
3. Select On SSH .
4. Select an option to create a new SSH connection, then specify server information (host, port, and username). Alternatively, you can select Existing and choose any available SSH configuration from the list. To create a new SSH configuration, follow the steps below: Creating an SSH configuration
   • Click next to the list of configurations:
   • Click, disable the Visible only for this project checkbox, and fill in the required fields:
   • Once done, the newly created SSH configuration will appear in the list of available configurations. It will also become available in the SSH Deployment Configurations settings. Click Next to proceed:
5. In the next dialog window, provide the authentication details to connect to the target server. Select Password or Key pair (OpenSSH or PuTTY) and enter your password or passphrase. If Key pair (OpenSSH or PuTTY) is selected, specify:
   • Private key : location of the file with a private key
   • Passphrase : similar to a password, it serves to encrypt the private key.

Click Next to proceed.

Wait until PyCharm completes the introspection of the SSH server.

In the next dialog, select a type of Python environment to configure on the SSH server. You can create a new virtual environment, select an existing one, or use a system interpreter.

• Select the Inherit global site-packages checkbox if you want all packages installed in the global Python on your machine to be added to the virtual environment you’re going to create. This checkbox corresponds to the —system-site-packages option of the virtualenv tool.
• You can configure the path mappings between your local project and the server. To do that, click the Browse icon in the Sync folders field and enter the path to the local project folder and the path to the folder on the remote server.

Click Create to complete adding the interpreter.

Configure an interpreter using Docker

1. Do one of the following:
   • Click the Python Interpreter selector and choose Add New Interpreter .
   • Press Control+Alt+S to open Settings and go to Project: | Python Interpreter . Click the Add Interpreter link next to the list of the available interpreters.
   • Click the Python Interpreter selector and choose Interpreter Settings . Click the Add Interpreter link next to the list of the available interpreters.
2. Select On Docker .
3. Select an existing Docker configuration in the Docker server dropdown. Alternatively, click and perform the following steps to create a new Docker configuration: Create a Docker configuration Click to add a Docker configuration and specify how to connect to the Docker daemon. The connection settings depend on your Docker version and operating system. For more information, refer to Docker connection settings. The Connection successful message should appear at the bottom of the dialog. For more information about mapping local paths to the virtual machine running the Docker daemon when using Docker on Windows or macOS, refer to Virtual machine path mappings for Windows and macOS hosts. You will not be able to use volumes and bind mounts for directories outside of the mapped local path. This table is not available on a Linux host, where Docker runs natively and you can mount any directory to the container.
4. The following actions depend on whether you want to pull a pre-built image from a Docker registry or to build an image locally from a Dockerfile. Pull a Docker image Select Pull or use existing and specify the tag of the desired image in the Image tag field. Build a Docker image Select Build and change the default values in the Dockerfile and Context folder fields if necessary. If required, expand the Optional section and specify the following:

Image tag	Specify an optional name and tag for the built image. This can be helpful for referring to the image in the future. If you leave the field blank, the image will have only a random unique identifier.
Build options	Set supported docker build options. For example, you can specify metadata for the built image with the —label option.
Build args	Specify the values for build-time variables that can be accessed like regular environment variables during the build process but do not persist in the intermediate or final images. This is similar to using the —build-args option with the docker build command. These variables must be defined in the Dockerfile with the ARG instruction. For example, you can define a variable for the version of the base image that you are going to use:

ARG PY_VERSION=latest FROM python:$PY_VERSION

The PY_VERSION variable in this case will default to latest and the Dockerfile will produce an image with the latest available version of Python, unless you redefine it as a build-time argument. If you set, PY_VERSION=3.10 , Docker will pull python:3.10 instead, which will run a container with Python version 3.10. Redefining the PY_VERSION argument is similar to setting the following command-line option:

—build-arg PY_VERSION=3.10

Wait for PyCharm to connect to the Docker daemon and complete the container introspection.

Next, select an interpreter to use in the Docker container. You can choose any virtualenv or conda environment that is already configured in the container or select a system interpreter.

Click OK . The configured remote interpreter is added to the list.

Configure an interpreter using Docker Compose

1. Do one of the following:
   • Click the Python Interpreter selector and choose Add New Interpreter .
   • Press Control+Alt+S to open Settings and go to Project: | Python Interpreter . Click the Add Interpreter link next to the list of the available interpreters.
   • Click the Python Interpreter selector and choose Interpreter Settings . Click the Add Interpreter link next to the list of the available interpreters.
2. Select On Docker Compose .
3. Select an existing Docker configuration in the Server dropdown. Alternatively, select Create new and perform the following steps to create a new Docker configuration: Create a Docker configuration Click to add a Docker configuration and specify how to connect to the Docker daemon. The connection settings depend on your Docker version and operating system. For more information, refer to Docker connection settings. The Connection successful message should appear at the bottom of the dialog. For more information about mapping local paths to the virtual machine running the Docker daemon when using Docker on Windows or macOS, refer to Virtual machine path mappings for Windows and macOS hosts. You will not be able to use volumes and bind mounts for directories outside of the mapped local path. This table is not available on a Linux host, where Docker runs natively and you can mount any directory to the container.
4. In Configuration files , specify the docker-compose.yml file. Also select the service. Optionally, specify environment variables and edit the Compose project name in Project name .
5. Wait until PyCharm creates and configures a new target:
6. Next, select an interpreter to use in the container. You can choose any virtualenv or conda environment that is already configured in the container, or select a system interpreter.
7. Click OK . The configured remote interpreter is added to the list.

Setting the default interpreter

In PyCharm, you can specify an interpreter that will be automatically set for all newly created projects.

1. Go to File | New Projects Setup | Settings for New Projects (on Window and Linux) or File | New Projects Setup | Preferences for New Projects (on macOS).
2. Select Python Interpreter settings. Then either choose an existing interpreter from the Python interpreter list of click to add a new interpreter. Click OK to save the changes. The change will become effective for all newly created projects in PyCharm.

Managing interpreter packages

For each interpreter, you can install, upgrade, and delete Python packages. By default, PyCharm uses pip to manage project packages. For conda environments you can use the conda package manager.

PyCharm smartly tracks the status of packages and recognizes outdated versions by showing the number of the currently installed package version (column Version ), and the latest available version (column Latest version ). When a newer version of a package is detected, PyCharm marks it with the arrow sign and suggests to upgrade it.

By default, the Latest version column shows only stable versions of the packages. If you want to extend the scope of the latest available versions to any pre-release versions (such as beta or release candidate ), click Show early releases .

You can upgrade several packages at once. Hold Cmd (macOS) or Ctrl on (Unix or Windows), left-click to select several items in the list of packages, and then click Upgrade .

See the detailed instructions:

• How to install a package
• How to upgrade the package
• How to uninstall the package

If you are looking for a more convenient way to search for Python packages, preview the documentation, and manage Python package repositories, try the Python Packages tool window. For more information, refer to Manage packages in the Python Packages tool window.

«Error: Please select a valid Python interpreter» in Pycharm

I have been asked to use Python in Pycharm and, after downloading it, I have found a problem which doesn’t allow me to compile anything because there is an «Error: Please select a valid Python interpreter» . I know there are similar questions already solved that propose solutions to this problem but I have revised those solutions and none of them is satisfactory for me. I would appreciate help very much. I let you here also some screenshots that show the error:

Подключить интерпретатор

Здравствуйте.
Впервые в жизни решил познакомиться с Python. Немного погуглив понял, что в своей Ubuntu я могу без особых проблем писать код прям в стандартном текстовом редакторе, что я и делал. Работает, файлы исполняются. Но так как стандартный текстовый редактор несколько ограничен, то стал выбирать себе IDE. Выбор пал на PyCharm. Поставил, включил, создал проект, добавил Python файл и получил «No Python interpreter configured for the project». Ну т.е. интерпретатор она не видит. Нашёл в настройках где его задавать, а список пуст. Не понимаю как это так. Я ведь успешно исполняю написанное в текстовом редакторе. Если написать в терминале «python3 —version», то в ответ будет «Python 3.7.5». Ну т.е. он есть.
Как сделать так, чтобы PyCharm его увидела? Если я что-то очень сильно не так понял, пожалуйста, объясните.

94731 / 64177 / 26122
Регистрация: 12.04.2006
Сообщений: 116,782
Ответы с готовыми решениями:

Посоветуйте интерпретатор
Всем привет! Ребят, посоветуйте, пожалуйста, хороший интерпретатор python на 10й винде. Я.

Интерпретатор macos
Не добавляется интерпретатор на MacOS. Создал venv, установил туда нужные модули, нажимаю.

PyCharm не видит интерпретатор
При каждом запуске файлa уже с кодом в PyCharm программа не видит интерпретатор. При создании же.

Интерпретатор для PyCharm
Доброго времени суток форумчане! Еще даже не начал изучать питон, только что установил Pycharm.

Интерпретатор питон, не устанавливается модуль
Я в свою очередь пытаюсь установить библиотеку pygame через terminal PyCharm. Получаю сообщение -.

Регистрация: 21.01.2020
Сообщений: 49
Когда интерпретатор не добавлен, выглядит всё примерно так:

Вы должны нажать Ctrl+Alt+S для вызова настроек. В настройках необходимо выбрать слева Project Interpreter, далее справа от строки с таким же названием Project Interpreter нажать на шестеренку и выбрать Add

Откроется окошко в котором нужно нажать ОК(если как вы говорите в консоли питон работает, значит Pycharm должен подхватить интерпретатор сам)

Далее тоже ОК

Спустя несколько секунд в правой нижней части увидите версию интерпретатора, можно работать
87844 / 49110 / 22898
Регистрация: 17.06.2006
Сообщений: 92,604
Помогаю со студенческими работами здесь

Настройка интерпретатор на PyCharm под Windows 7
Windows 7. В общем установил я Python 3.5 и поставил PyCharm py(последний самый), когда создал.

Как скачать интерпретатор для python?
Помогите по жалуйста я недавно начал учить питон и узнал что нужен интерпетатор обесните что это.

Brainfuck интерпретатор
Напишите интерпретатор практически полноценного языка "Взрыв мозга". Условия те же, что и в.

Интерпретатор в ОС Java
Здравствуйте. У меня возник вопрос: существует ли интерпретатор (или компилятор) python под ОС Java.

Интерпретатор python
Допустим есть программа на c#, c++, в которой надо использовать скрипты python. Т.е. есть папка с.

[Solved] No python interpreter configured for the project

No python interpreter configured for the project is a common error message you may encounter in PyCharm. PyCharm is a very useful editor having nice features like debugging, testing, refactoring and code completion. However, it needs an external interpreter (Python.exe) to run Python code.

This message tells you that project configuration should be updated to use a valid Python installation. To open the related configuration, you can click on Configure Python interpreter link as shown below. Or alternatively, you can select File -> Settings from the menu and open Project -> Python Interpreter setting.

Python Interpreter setting shows that is selected for the project. To select (or create) a Python.exe interpreter click on Gear icon and select Show All… option.

In the Python Interpreters window that opens, the list is empty. To add a new Python Interpreter click on Plus (+) icon.

In Add Python Interpreter window, you can create a new virtual Python environment. My project is under C:\abcstudyguide\python directory, so I have created a folder venv under this directory to create a new virtual environment for my project.

You must then choose a Base interpreter. Base interpreter is the python.exe file installed on your system. When you create a virtual environment, it will be based on Python version specified here. If you need a specific version of Python (like 3.8, 3.7), you need show path of this Python version in Base interpreter filed.

If you don’t have Python installed on your system yet, you can download it from https://www.python.org/downloads/. Note that I installed Python in C:\Python\Python39 directory on my computer. However, default installation path is C:\Users\\AppData\Local\Programs\Python .

Virtual Environments in Python
Instead of creating a new virtual environment, you can also use the System Interpreter, but this method is not recommended.

You can work on many different Python projects. Virtual environments are useful for creating an isolated environment for each Python project. Consider you are working on two different projects (ProjectA and ProjectB). Both projects are using the same library (LibraryX) but they require different versions of LibraryX. ProjectA needs version 1.0 of LibraryX, ProjectB needs version 2.0.

To avoid version conflicts between third party libraries, each project should create and use its own virtual environment instead of using System Interpreter ( C:\Python\Python39\python.exe ).

When you create a new Python virtual environment and select it as Python Interpreter in your project settings, No python interpreter configured for the project message will be gone.